How to repair a windshield crack?
Decision Card
Effort: One afternoon (about 1–2 hours plus cure time) — buy a consumer UV-resin windshield kit, read the kit instructions, and try it on a single short crack well away from the glass edge and the driver’s line of sight.
Honest take: The video presents drilling the crack ends as a routine first step, but sources disagree: one DIY tester reported drilling extended the crack and a glass shop explicitly advises against drilling at all. It also gives no crack-length or location limits and calls the resin “epoxy”, while manufacturer data sheets describe acrylated urethane resins as the usual chemistry.
Concrete next steps:
- Measure the crack and check whether it reaches the windshield edge (5 min); guides cited in my searches put the DIY limit at roughly 6–8 inches, per Rick’s Free Auto Repair Advice and EngineerFix.
- Read the DIY-versus-professional comparison at GT Glass before deciding whether to drill (10 min).
- Look up the current repair standard, ANSI/AGSC/NWRD/ROLAGS 002-2022, for the authoritative repairable-damage limits (15 min; the full text is paid).
- Skip if the crack is longer than about 8 inches, reaches the windshield edge, is still spreading, or sits in the driver’s direct line of sight — those cases point to a professional repair or replacement.
TL;DR
A 25-second clip describes a windshield crack repair in which holes are drilled at the crack ends to stop it spreading, then a UV-curing resin is applied to restore clarity. The general method matches documented repair practice, but the drilling step is contested and the “as if never cracked” result is overstated.
Key Points
- The clip frames the technique as how local artisans in Africa repair windshield cracks. 00:02
- The first step is drilling small holes at the ends of the crack. 00:04
- The holes are then tapped lightly to blunt the edges. 00:06
- The stated purpose of blunting is to stop the crack from spreading further. 00:08
- A resin described as epoxy is applied to the crack. 00:12
- The resin hardens under ultraviolet light. 00:14
- Once cured, the resin is said to be almost completely transparent. 00:17
- The repair is claimed to largely restore clarity, making the glass look as if it was never cracked. 00:20
Notable Quotes
“They start by drilling small holes at the ends of the crack, then tap them lightly to blunt the edges and stop the crack from spreading further.”
“They then apply an epoxy resin that hardens under the effect of ultraviolet rays.”
“Once cured, the resin becomes almost completely transparent and largely restores the glass’s clarity, making it look as if the windshield was never cracked.”
Verified Claims
Verdicts below rest on search-result summaries of the linked pages; I did not open the pages themselves.
1. Drilling small holes at the ends of a crack is a step in windshield crack repair.
- 00:04
- Sources: Windshield Repair Forum thread (describes drilling and “popping” at or just past the crack end); GT Glass (advises not to drill the glass)
- Verdict: Disputed — the practice exists among technicians, but DIY-oriented sources warn against it.
2. Drilling and tapping the crack ends stops the crack from spreading.
- 00:08
- Sources: Windshield Repair Forum thread; GeniusAsian crack repair experiment (tester reported that drilling extended the crack)
- Verdict: Disputed — it can work, but at least one documented attempt made the crack longer.
3. The resin used is an epoxy.
- 00:12
- Sources: AEGIS resin data sheet (lists acrylated urethane resins); US8268104B1 (a UV-curing cationic epoxy method for windshield repair)
- Verdict: Inconclusive — UV-curing epoxy systems exist, but acrylic-type resins are the commonly listed chemistry, and the video does not identify the product.
4. The resin hardens under ultraviolet light.
- 00:14
- Sources: AEGIS resin data sheet (cured with 365 nm UVA lamps); YourMechanic (sunlight or a UV lamp finishes the repair)
- Verdict: Confirmed
5. The cured resin is almost completely transparent and largely restores clarity.
- 00:17
- Sources: US8268104B1 (a resin with a refractive index matching glass makes the crack nearly disappear); Henkel TEROSON VR 1510 (refractive index similar to glass)
- Verdict: Confirmed — this depends on the resin’s refractive index matching the glass, about 1.50–1.52 per the AEGIS data sheet.
6. The repaired windshield looks as if it was never cracked.
- 00:21
- Sources: US8268104B1 (a hairline remains visible at a head-on viewing angle)
- Verdict: Disputed — a faint line typically remains, so “never cracked” overstates the result.
7. The method applies to windshield cracks in general (no size or location limits are given).
- 00:02
- Sources: Rick’s Free Auto Repair Advice; Glass.com (cites a ROLAGS upper limit of 14 inches for cracks); EngineerFix (six inches or less as the accepted limit)
- Verdict: Disputed — sources give limits between 6 and 14 inches and advise professional handling for cracks that reach the edge.
Tools, Papers & Standards Mentioned
The video names no products, papers, or standards. The relevant canonical references for what it describes are:
- UV-curing windshield repair resin — AEGIS resin data sheet (acrylated urethane); US8268104B1, UV-curing cationic epoxy for windshield repair
- Repair of Laminated Automotive Glass Standard (ROLAGS) — ANSI/AGSC/NWRD/ROLAGS 002-2022; overview at British Glass
Follow-up Questions
- What does ROLAGS 002-2022 actually specify for maximum repairable crack length and for cracks that reach the windshield edge, given that secondary sources quote anywhere from 6 to 14 inches?
- Under what conditions (glass temperature, drill depth, crack type) does drilling a stop hole arrest a crack rather than extend it?
- How much of the windshield’s structural strength does a resin-filled long crack recover, and how does the repair hold up over years of thermal cycling and UV exposure?
Sources
- https://www.gtglass.com/blogs/learn-page/diy-vs-professional-windshield-crack-repair
- https://ricksfreeautorepairadvice.com/fix-a-windshield-crack/
- https://engineerfix.com/how-long-of-a-crack-in-a-windshield-can-be-repaired/
- https://webstore.ansi.org/standards/ansi/ansiagscnwrdrolags0022022
- https://www.windshield-repair-forum.com/viewtopic.php?p=30530
- https://geniusasian-com.pages.dev/windshield-crack-repair-experiment-2
- https://www.wpg.com/media/documents/AEGIS/AEGIS_ResinDataSheet.pdf
- https://patents.google.com/patent/US8268104
- https://www.yourmechanic.com/article/how-to-fix-chips-and-cracks-in-your-car-window-by-jason-unrau
- https://henkel-adhesives.com/fr/en/product/windshield-adhesives/teroson_vr_1510.html
- https://www.glass.com/info/?p=27
- https://www.britglass.org.uk/knowledge-base/digital-library-and-information-services/repair-laminated-automotive-glass-standard