VSCode + Cline + Continue | NEVER PAY for CURSOR again. Use this OPEN SOURCE & LOCAL Alternative
Decision Card
Effort: About an afternoon (2–3 hours). Install VS Code, Ollama, Continue and Cline. Run ollama pull qwen2.5-coder:1.5b and add it to Continue with roles: [autocomplete]. Then point Cline at an OpenRouter API key and give it one small multi-file task.
Honest take: The setup is “free” mostly in name. The video’s own Cline demo used up all its free trial credits on one Flappy Bird prompt. The fallback is OpenRouter’s free tier, which OpenRouter’s docs cap at 50 requests per day unless you’ve bought at least 10 credits. That is a small budget for an agent that makes many calls per task. The video also calls the local 7B DeepSeek R1 “the same” model as the 671B one on OpenRouter. Ollama’s own page lists the 7B as a Qwen-based distill, which helps explain why it acted like a plain chatbot in Continue.
Concrete next steps:
- Set up local autocomplete only (about 30 min). Use the
qwen2.5-coder:1.5b+roles: [autocomplete]example from Continue’s autocomplete docs and judge the latency on your own hardware. - Try Cline with an OpenRouter key on one throwaway multi-file task (about 1 hour). Count how many requests it uses against the free-model limits before you rely on it.
- Re-check current Cursor pricing at cursor.com/pricing (5 min). The “$20 Pro” plan the video compares against isn’t on that page anymore. Tiers now run from Free and Plus ($8) up to Ultra ($200).
- Skip if you already pay for an AI coding tool you’re happy with, or your machine can’t comfortably run a 7B model next to your editor. Free cloud models are rate-limited and the small local models are much weaker, so you’d be giving up quality.
TL;DR
The video sets up VS Code with two extensions as a free Cursor replacement: Continue.dev (autocomplete and inline edits using local Ollama models) and Cline (agent-style multi-file generation). When Cline’s trial credits run out, it switches Cline to OpenRouter’s free DeepSeek models.
Key Points
- Cursor is presented as a paid VS Code fork, and the video’s pitch is for people who don’t want to pay $20/month for Pro. 00:45
- The proposed stack is VS Code plus two extensions, Cline and Continue.dev, which together are meant to copy Cursor’s features. 01:57
- Claimed advantage: you control your data and can use free local models, so no privacy mode is needed. 02:02
- Ollama runs open models such as DeepSeek R1 and Qwen locally. Local models need disk space, and OpenRouter is suggested as a fallback for weaker machines. 02:47
- Continue config: DeepSeek R1 7B for chat, Qwen 2.5 Coder 1.5B for autocomplete. The autocomplete model needs an explicit role. 04:23
- Continue’s chat with the local R1 model only answered like a chatbot and didn’t edit files. Continue also lacks Cursor-style multi-file editing and terminal commands, which is why Cline is added. 06:21
- Cline signs you up with Google or GitHub for trial credits. It can plan, create files and run commands, and an auto-approve option speeds it up. 07:29
- A single “retro Flappy Bird” prompt in Cline produced a playable game but used up all the free credits. 09:11
- Continue’s Ctrl/Cmd+I edits highlighted code, standing in for Cursor’s Ctrl+K. 09:43
- After the trial, connect Cline to OpenRouter’s free DeepSeek R1 (671B) or DeepSeek V3 0324 models. Free models can be slow or time out. 10:05
Notable Quotes
- “This setup is even better than cursor because you have full control over your data.” 02:02
- “A small model is enough for the autocomplete feature as larger models have been shown to not significantly improve performance.” 04:41
- “All right, now my request to create a Flappy Bird game has consumed all of the free credits that I get from client.” 09:11
Verified Claims
Claim: Cursor Pro costs $20/month, and the free version is limited. 00:45
- Sources: Cursor pricing (official); DEV Community pricing breakdown
- Verdict: Disputed (outdated). Third-party write-ups say Pro was $20/month, but Cursor’s current pricing page lists Free, Plus ($8), Premium ($30), Super ($100) and Ultra ($200), with no Pro tier.
Claim: Cursor is a fork of VS Code, and VS Code is open source. 00:50
- Sources: microsoft/vscode on GitHub; Lowcode Agency: Is Cursor a VS Code fork?
- Verdict: Confirmed, with a caveat. Cursor is built on Code – OSS, which is MIT-licensed. The Visual Studio Code product you download from Microsoft is released under a separate Microsoft product license.
Claim: A small model like Qwen 2.5 Coder 1.5B is enough for autocomplete, because larger models don’t significantly improve it. 04:35
- Sources: Continue autocomplete docs
- Verdict: Confirmed. Continue recommends
qwen2.5-coder:1.5band says going above roughly 10B parameters “does not significantly improve performance.”
Claim: The OpenRouter DeepSeek R1 is “the same as the one from Ollama,” only with 671 billion parameters. 11:05
- Sources: Ollama deepseek-r1 library page
- Verdict: Disputed. Ollama lists the 7B tag as DeepSeek-R1-Distill-Qwen-7B, a model derived from Qwen 2.5. Only the 671B tag is the full R1.
Claim: DeepSeek V3 0324 has 685 billion parameters and is on par with GPT-4 for coding. 11:28
- Sources: DeepSeek-V3-0324 on Hugging Face; OpenRouter model page
- Verdict: Partially confirmed. The 685B size is confirmed. The GPT-4 comparison is inconclusive, because the model card’s text only compares the model with the earlier DeepSeek-V3.
Claim: Free OpenRouter models may be slow or time out under load. 11:42
- Sources: OpenRouter API limits; JanitorAI DeepSeek via OpenRouter troubleshooting
- Verdict: Confirmed, and the limits are tighter than the video suggests. Free models are capped at 20 requests/minute and 50 requests/day, rising to 1,000/day only after buying at least 10 credits.
Claim: Cline can create files, run commands, and optionally auto-approve actions. 08:45
- Sources: cline/cline on GitHub; KodeKloud Cline workspace configuration
- Verdict: Confirmed. Cline is Apache-2.0 licensed and asks for approval on every edit and command by default. Auto-approve is a toggle you turn on.
Claim: Continue can’t do multi-file editing or run terminal commands the way Cursor does. 06:47
- Sources: Continue config reference
- Verdict: Inconclusive. Continue now documents an Agent mode, which needs a model with tool calling and gets its tools from MCP servers. The reference page doesn’t confirm built-in file-editing or terminal tools.
Tools, Papers & Standards Mentioned
- Cursor: cursor.com/pricing
- Visual Studio Code / Code – OSS: github.com/microsoft/vscode
- Continue.dev: docs.continue.dev
- Cline: github.com/cline/cline
- Ollama / DeepSeek R1: ollama.com/library/deepseek-r1
- Qwen 2.5 Coder (Continue autocomplete): Continue autocomplete docs
- OpenRouter: openrouter.ai/docs/api-reference/limits
- DeepSeek V3 0324: huggingface.co/deepseek-ai/DeepSeek-V3-0324
Follow-up Questions
- Cline sends many requests per task. How many OpenRouter free-tier requests does a typical multi-file Cline task use, and is the 50-per-day cap realistic for daily work?
- Can a local model that supports tool calling, run through Ollama, drive Cline or Continue’s Agent mode reliably on consumer hardware? Distilled R1 models are poor at tool calling, so they probably won’t.
- Since Cursor dropped the $20 Pro plan, how does its new Plus plan ($8) compare with a paid OpenRouter or BYOK setup for Cline in total monthly cost?
Sources
- https://cursor.com/pricing
- https://dev.to/techsifted/cursor-ai-pricing-2026-free-vs-pro-vs-business-plans-broken-down-2fmg
- https://github.com/microsoft/vscode
- https://www.lowcode.agency/blog/is-cursor-ai-vs-code-fork
- https://docs.continue.dev/customize/deep-dives/autocomplete
- https://docs.continue.dev/reference
- https://ollama.com/library/deepseek-r1
- https://huggingface.co/deepseek-ai/DeepSeek-V3-0324
- https://openrouter.ai/deepseek/deepseek-chat-v3-0324
- https://openrouter.ai/docs/api-reference/limits
- https://help.janitorai.com/en/article/troubleshooting-deepseek-via-openrouter-8xko1u/
- https://github.com/cline/cline
- https://notes.kodekloud.com/docs/Cline/Introduction-to-Cline/Demo-Initial-Workspace-Configuration/page